NEWS
Here are some detailed tips on how to maintain a sauna room:
Wipe Down Surfaces
After each use, use a soft, damp cloth to wipe the interior surfaces of the sauna, including the benches, walls, and floor. This helps to remove sweat, dirt, and other residues. Pay special attention to areas where people touch or sit, as these can accumulate more grime.
For wooden benches and walls, avoid using harsh chemicals. Instead, a mixture of warm water and a small amount of mild, non - abrasive wood cleaner can be used. Make sure to wring out the cloth well so that it's not overly wet, as excess water can damage the wood.
Dry the Room
Ensure that the sauna room is thoroughly dried after each use. This is especially important for wooden saunas to prevent warping, cracking, and the growth of mold. You can leave the door ajar and turn on any built - in ventilation systems to allow air to circulate and the room to dry completely.
Check and Clean the Heating Elements
If your sauna is electrically heated, turn off the power and let the heating elements cool down completely. Then, carefully inspect the heating elements for any signs of damage, such as cracks, breaks, or discoloration. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any dust or debris that may have accumulated on the elements.
For a wood - burning sauna, clean out the ashes from the stove regularly. Make sure the stove and chimney (if applicable) are free of any blockages to ensure proper ventilation and efficient heating.
Inspect and Clean the Ventilation System
Check the ventilation ducts and vents to ensure they are clear of any obstructions. Dust, lint, or other debris can accumulate over time and reduce the effectiveness of the ventilation. Use a vacuum cleaner or a brush to clean the vents and ducts.
If your sauna has a fan as part of the ventilation system, make sure it's working properly. Lubricate the fan's moving parts (if needed) according to the manufacturer's instructions to keep it running smoothly.
Wood Treatment
If your sauna is made of wood, apply a high - quality wood sealer or preservative once a month. This helps to protect the wood from drying out, cracking, and damage caused by moisture and heat. Before applying the sealer, make sure the wood is clean and dry. Use a soft cloth or a brush to evenly apply the sealer, following the product's instructions.
Check for any signs of wood damage, such as splinters, loose boards, or warped surfaces. Repair or replace any damaged wood parts promptly to maintain the integrity of the sauna.
Check the Door and Window Seals
Inspect the seals around the door and windows of the sauna. Over time, these seals can wear out or become damaged, allowing heat to escape and moisture to enter. If you notice any gaps or cracks in the seals, replace them. You can use a simple test by closing the door and window and checking for any drafts or light leaks to identify problem areas.
Inspect the Sauna Stones
In a traditional sauna with sauna stones, check the stones for any signs of cracking or crumbling. Damaged stones can affect the sauna's performance as they may not heat evenly or hold heat as well. Replace any damaged stones with new ones of a suitable type (such as basalt or granite).
Clean the sauna stones by turning off the heat and allowing them to cool completely. Then, use a damp cloth to gently wipe away any residue or mineral deposits on the stones.
Overall System Check
Have a professional plumber or electrician (depending on the type of sauna) inspect the plumbing (if applicable) and electrical systems of the sauna. They can check for any potential leaks, faulty wiring, or other safety hazards and make any necessary repairs or adjustments.
If your sauna is outdoors, also inspect the exterior for any signs of damage from the elements, such as peeling paint, rotting wood, or damage to the roof (if it has one). Make any necessary repairs to protect the sauna from further damage.
Please leave your contact information
What are you lookking for?